These models allow users to calibrate the IRt/c sensors to match a thermocouple output in whatever temperature range desired.
For example: if the requirement is to measure a non-metal target in
the 1000 F to 1100 F (540 C to 590 C) range, an IRt/c.10A-K-HiE sensor
can be selected. It is then installed and calibrated, in place, to generate
a type K signal for that temperature range.
|
|
 |
|
|
 |
 |
 |
Ordering information: (Model) - (Thermocouple Type) - (HiE or LoE)
Use the Selection Table. Select the model for (1)
temperature range (2) spot size, and (3) target surface material (nonmetal
or metal, uncoated). Then finally, (4) select the thermocouple type (J,K,
R or S).
Example: IRt/c.10A -K- HiE
Adjustable IRt/c Options
Adjustable IRt/c models are also available, Pre-Calibrated,
from Exergen with NIST traceability for quick multiple same sensor installations
for factory automation and OEMs. Also, millivolt signal output curves and
mv tables are available for all sensor models for special calibrations.
Adjustable Model Selection Table
T/C Temperature Range
Target
Model Types
°F °C
Spot Size Surface
.10A-HiE
J, K -50 to 2500 -45 to 1370
Distance ÷ 10 Nonmetal
.10A-LoE
J, K 500 to 2500 260 to 1370
Distance ÷ 10 Metal
.20A-HiE
J, K 500 to 3000 260 to 1650
Distance ÷ 20 Nonmetal
.20A-LoE
J, K 1000 to 3500 540 to 1930 Distance
÷ 20 Metal
.100A-HiE R, S
1000 to 5000 540 to 2760 Distance ÷ 100
Nonmetal
.100A-LoE R, S
1500 to 5000 820 to 2760 Distance ÷ 100
Metal
.2ACF-HiE
J, K 500 to 2500 260 to 1370
2.9 mm Nonmetal
.2ACF-LoE
J, K 1000 to 2500 540 to 1370
2.9 mm Metal
.2/15ACF-HiE J, K
0 to 2500 -18 to 1370 2.9 x 8.7 mm
Nonmetal
.2/15ACF-LoE J, K
500 to 2500 260 to 1370 2.9 x 8.7 mm
Metal
.3AMF-Hi E J, K
500 to 2500 260 to 1370 3.7 mm
Nonmetal
.3AMF-LoE
J, K 1100 to 2500 590 to 1370
3.7 mm Metal
.4ACF-HiE J,
K 0 to 2500 -18 to 1370
5.0 mm Nonmetal
.4ACF-LoE J,
K 600 to 2500 320 to 1370
5.0 mm Metal
.8ACF-LoE J,
K 300 to 2500 150 to 1370
8.5 mm Metal
.2/18AMF-HiE J, K
0 to 2500 -18 to 1370 4.5 x 12.8 mm
Nonmetal
.2/18AMF-LoE J, K
600 to 2500 320 to 1370 4.5 x 12.8 mm
Metal
.6AMF-HiE J,
K 0 to 2500 -18 to 1370
6.5 mm Nonmetal
.6AMF-LoE J,
K 700 to 2500 370 to 1370
6.5 mm Metal
.12AMF-LoE J, K
400 to 2500 200 to 1370 11.1 mm
Metal
.2/15ALF-HiE J, K
700 to 3000 370 to 1650 3.0 x 7.2 mm
Nonmetal
.2/15ALF-LoE J, K
1200 to 3500 650 to 1930 3.0 x 7.2 mm
Metal
.4ALF-HiE
J, K 700 to 3000 370 to 1650
4 mm Nonmetal
.4ALF-LoE
J, K 1300 to 3500 700 to 1930
4 mm Metal
.7ALF-HiE J, K 300 to 3000
150 to 1650 7.2 mm
Nonmetal
.7ALF-LoE J, K 900 to 3500
480 to 1930 7.2 mm
Metal
.2AXLF-HiE R, S
1100 to 3500 590 to 1930 1.8
mm Nonmetal
.2AXLF-LoE R, S
2200 to 3500 1200 to 1930 1.8 mm
Metal
.4AXLF-HiE R, S
900 to 3500 480 to 1930 4.8 mm
Nonmetal
.4AXLF-LoE R, S
1700 to 3500 930 to 1930 4.8
mm Metal
.10AULF-HiE J, K
0 to 2500 -18 to 1370 10 x 38 mm
Nonmetal